BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Die-cut Kapton build-plate sheets sized 152 x 152 mm with silicone adhesive, rated to 280 °C for ABS, PLA and other thermoplastics
This pack contains ten die-cut Kapton sheets sized at 6''x6'' (152 x 152 mm) for use as a build surface on fused-deposition printers. Each sheet has a total thickness of 0.06mm (2.4mil) split evenly between film and silicone adhesive layers. The polyimide material withstands temperatures up to 280C (536F) and works with ABS, PLA, PVA, polycarbonate and other thermoplastics. A release liner is included to simplify positioning and bubble-free application.
Makers who print high-temperature filaments and want a thin, durable surface that peels cleanly will benefit from the silicone adhesive and high heat rating. The pre-cut dimensions match common 6-inch beds, reducing trimming work. Users with larger build plates or those who prefer permanent surfaces such as PEI or textured spring steel should look at other solutions. The tape is not intended for non-heated beds or for printers requiring thicker sacrificial layers.
During long prints the tape remains stable at the rated 280C limit, maintaining adhesion between the first layer and the bed without lifting at the corners. The thin 0.03mm adhesive layer transfers heat quickly to the filament, helping to prevent warping on extended ABS or polycarbonate jobs. After many thermal cycles the polyimide film can develop micro-tears or lose stickiness, so sheets should be inspected and swapped when surface quality drops.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Build Plate Tape |
The sheets are die-cut to 152 x 152 mm (6'' x 6''), so your printer's build plate must be at least that large in both dimensions.
Yes, the polyimide film with silicone adhesive is rated to 280 °C (536 °F), which covers polycarbonate and other high-temperature filaments.
A correctly applied sheet lies flat with no trapped bubbles, the release liner peels away cleanly, and the first print layer adheres evenly across the full 152 x 152 mm surface.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?