BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 12 V 40 mm ball-bearing fan delivering 5.75 CFM at 24 dBA for targeted 3D-printer cooling
This 40 mm ball bearing fan runs on 12 V DC and fits 3D printers as a compact cooling accessory. It draws 0.06 A at a nominal speed of 6000 RPM and measures 40 x 40 x 10 mm with 3.5 mm mounting holes. Builders looking for a drop-in replacement for small-frame printers will find the dimensions match common 40 mm mounts.
The fan delivers 5.75 CFM (9.77 m³/h) of airflow at a noise level of 24 dBA, which is modest for a 40 mm frame. That output is sufficient for targeted cooling of hotend zones, stepper motors or control boards, but it cannot replace larger case fans or high-static-pressure radiators. Installers needing higher flow or lower noise for enclosed chambers should look elsewhere.
Operation is specified at 12 V DC only, so the fan must be driven from a 12 V rail or a compatible buck converter. Connecting it directly to a 24 V printer supply without regulation will damage the motor. Verify that your printer’s fan header or controller provides a stable 12 V output before wiring.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
This fan is rated for 12 V DC only; match it to a 12 V fan header or power supply on your machine.
It moves 5.75 cubic feet of air per minute at 6000 RPM, providing targeted cooling for hot-ends, stepper drivers or small enclosure zones.
Yes, the 3.5 mm diameter holes on 40 mm centres align with the common 40×40 mm mounting grid used on most printers.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?