3Dgenius
3Dgenius Silk PLA Tri-Color 1.75mm 250g Rose Red Sky Blue Green
Tri-color silk PLA filament coextrudes rose red, sky blue and green for multi-colour prints from a single 250 g spool
- Diameter1.75
- Product colorTri Colors(rose Red+sky Blue+green)
- Main materialPolylactic Acid
- Product weight0.72 lb (0.33 kg)
- Three colors in one print from tri-color coextrusion
- Consistent flow with ±0.03 mm diameter accuracy
- Moisture-free printing from 24-hour drying and vacuum seal
- Wide printer compatibility at 1.75 mm diameter
- Ready-to-print convenience on a 250 g spool
Tri-colour Silk PLA for FDM Printing
This 250 g spool of 1.75 mm silk PLA blends rose red, sky blue and green in a single coextruded strand. Every inch contains all three colours so each model shows different hues depending on the viewing angle. The filament is vacuum sealed after 24 hours of drying to prevent moisture uptake and bubble formation. It suits makers who want multi-colour effects without changing spools.
Makers seeking angle-dependent colour shifts
The tri-colour design works best on models with curved or faceted surfaces that catch light from multiple directions. Printers limited to a single extruder can still produce three-tone parts without pausing for swaps. Users who need consistent single-colour output or exact colour matching for mechanical parts should choose a standard single-colour PLA instead.
250 g spool with ±0.03 mm tolerance
The 0.55 lb spool feeds cleanly without crossed windings, reducing tangles during long prints. Dimensional accuracy of ±0.03 mm supports reliable bridging and layer adhesion at 30–60 mm/s. Recommended nozzle temperature is 190–235 °C with a heated bed at 50–60 °C. The small spool size suits test prints or small batches but will require frequent changes on large projects.
How it compares
Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.
- Price $35.99
- Pricier than about 68% of the 305 comparable items (median $27.99).
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | 3Dgenius |
| Product color | Tri Colors(rose Red+sky Blue+green) |
| Size & build | |
| Main material | Polylactic Acid |
| Diameter | 1.75 |
| Product weight | 0.72 lb (0.33 kg) |
Questions about this item
Will the 1.75 mm diameter work with my printer that uses 1.75 mm filament?
Yes, the filament is manufactured to a 1.75 mm diameter with a tolerance of ±0.03 mm, matching the standard 1.75 mm specification used by most FDM printers.
Can I print this tri-color silk PLA alongside standard single-color PLA on the same printer?
Absolutely. It prints at the same nozzle temperature range of 190–235 °C and bed temperature of 50–60 °C as typical PLA, so you can swap spools without changing hardware.
How can I verify the tri-color effect is printing correctly after setup?
Print a small test model; you should see rose red, sky blue and green appear at different viewing angles on the same print, confirming the co-extruded colors are feeding properly.
More in 3D Printer Filament
Similar items
SUNLU PETG Filament 1.75mm 2kg Black+White
- 2000g Black+white
- Polyethylene Tereph…
FlashForge DTUS Silk PLA Filament Dreamy Trio 1.75mm 1kg
- Dreamy Trio
- Polylactic Acid
FlashForge Chameleon PLA Filament 1.75mm Burnt Titanium 2.2lbs
- Burnt Titanium
- Polylactic Acid





