Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
128 GB DDR4-2933 ECC registered quad-rank RDIMM for Supermicro servers
This 128GB registered DDR4 module runs at 2933MHz with CL21 latency and 1.20V operation. It uses a 4Rx4 quad-rank layout built on Samsung 3DS/TSV chips and carries Supermicro certification for validated server platforms.
Registered ECC RDIMMs require a chipset and CPU that support registered signalling and error correction; consumer desktop boards will not POST with them. The 4Rx4 quad-rank organisation increases electrical load per slot, so the maximum number of modules per channel is often lower than with single or dual-rank DIMMs.
Confirm that your motherboard or server qualified vendor list includes the MEM-DR412MH-ER29 part number and supports 128GB quad-rank RDIMMs at 2933MHz. Check the maximum supported capacity per slot and total system capacity, as some platforms cap registered DIMM density below 128GB. Ensure the BIOS revision in use recognises Samsung 3DS/TSV modules.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR412MH-ER29 |
| Total capacity | 128 GB |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Processor | |
| Chipset | Samsung Chipset |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2S2Rx4 (4Rx4) |
| Power | |
| Rated voltage | 1.2 V |
This module provides 128GB in a single 288-pin RDIMM using 3DS/TSV technology with a 2S2Rx4 (4Rx4) organisation. Select it when your server board supports quad-rank registered DIMMs and you need maximum density per slot.
The module runs at DDR4 2933 (PC4-23400) with CL21 latency at 1.20V, giving 23400 MB/s peak bandwidth per stick when the platform enables that data rate.
The registered ECC interface adds one clock cycle of buffering for signal integrity, allowing dense 4Rx4 loads on 288-pin DDR4 server boards while maintaining the 2933 MHz specification.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?