Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 128 GB DDR4 2933 MHz ECC load-reduced DIMM for compatible HPE servers
This 128GB DDR4 module runs at 2933MHz with CL21 latency and 1.20V operation. It uses a 288-pin LRDIMM form factor with 4DRx4/4Rx4 rank configuration and includes ECC error correction. The module is built as a direct replacement for HPE part numbers P18454-B21, P11057-1A1, P11057-6A1, P19047-B21, P19047-H21, and P19047-K21.
Replacing smaller LRDIMMs with this 128GB module increases total memory capacity per slot, which is valuable for virtualization hosts and database servers that benefit from fewer populated slots. The jump is worth it when your workload demands maximum density and your platform supports 128GB LRDIMMs at 2933MHz. It does not suit systems limited to RDIMM or lower-density modules.
The module installs in standard 288-pin DDR4 DIMM slots that support load-reduced memory. It requires a server platform qualified for 128GB LRDIMMs at 2933MHz with 1.20V operation. No heat spreader is present, so airflow across the module must be provided by the system chassis. Population rules and maximum per-channel limits depend on the specific server model.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | HP/HPE RAM Equivalent Replacement Memory |
| Model name | P18454-B21, P11057-1A1, P11057-6A1, P19047-B21, P19047-H21, P19047-K21 |
| Part number | P18454-B21, P11057-1A1, P11057-6A1, P19047-B21, P19047-H21, P19047-K21 |
| Total capacity | 128 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 4DRx4/4Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
This module uses the standard 288-pin DDR4 DIMM form factor and requires a slot that supports Load Reduced ECC memory at 1.2V.
Align the notch with the slot key, press straight down until both side clips click, and confirm the BIOS detects the full 128GB at 2933MHz.
Replace it if memory diagnostics report uncorrectable ECC errors, the server fails POST with this module installed, or a firmware update requires a different rank configuration.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?