Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3 1066 ECC RDIMM 4Rx4 server memory module for compatible Dell systems
This 16GB registered DIMM operates at 1066MHz with CL7 latency and 1.50V. It uses a 4Rx4 organisation and major-brand chips to deliver error-correcting memory for compatible Dell PowerEdge and Precision systems. The 240-pin module is a direct replacement for the listed Dell part numbers.
The registered buffer reduces electrical load on the memory controller, allowing stable operation when all slots are populated. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long-running server workloads. Standard 1.50V DDR3 voltage keeps power draw predictable across extended duty cycles.
Confirm your system accepts DDR3 registered ECC modules in a 4Rx4 configuration at 1066MHz. The motherboard must provide 240-pin DIMM slots wired for registered memory; unbuffered or non-ECC platforms will not POST with this module. Cross-reference the Dell part numbers above with your service manual to ensure compatibility.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3 1066 (PC3 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.5 V |
The module operates at the standard DDR3 voltage of 1.5V, keeping power draw typical for registered server DIMMs of this speed and capacity.
A DDR3 240-pin RDIMM slot with registered-memory support in the BIOS is required; standard unbuffered desktop slots will not work.
Mixing 4Rx4 and 2Rx4 ranks is often possible if the platform supports the total rank count per channel, but you must verify the server's memory population rules first.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?