Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3 1066 ECC registered DIMM with 4Rx8 organisation and 1.5 V operation
This A-Tech module provides 16GB of DDR3 server memory in a 240-pin RDIMM form factor. It operates at 1066MHz with a PC3-8500 rating and a CAS latency of CL7. The stick runs at the standard 1.50V DDR3 voltage and uses a 4Rx8 rank configuration with major-brand chips.
The module is built as a direct replacement for the IBM-Lenovo 77P8692 part number and targets servers or workstations that require registered ECC memory. Systems that only accept unbuffered non-ECC DIMMs or that use a different DDR generation will not support this stick. Buyers should verify their platform's qualified-vendor list before ordering.
Registered ECC operation is the single attribute that determines whether this DIMM will work in a given chassis. If the motherboard demands registered error-correcting modules, this 16GB kit meets that requirement; otherwise the system will not post.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3 1066 (PC3 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx8 |
| Power | |
| Rated voltage | 1.5 V |
Power down the server, open the chassis, align the notch on the 240-pin DDR3 module with the slot key, press firmly until both retention clips click, then verify the BIOS recognises the full 16 GB at 1066 MHz.
No routine maintenance is required; the module either passes POST and runs indefinitely or it fails, at which point you replace the single 16 GB stick with another DDR3 1066 ECC RDIMM.
The four-rank organisation increases electrical loading on the memory bus, so the platform’s maximum supported rank-per-channel limit is reached before bandwidth or thermal limits become an issue.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?