Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16GB DDR3-1066 ECC registered DIMM with 4Rx4 organisation and 1.5V operation for HP 501538-001 and 593915-S21 servers
This A-Tech module delivers 16GB of DDR3 1066MHz PC3-8500 ECC RDIMM capacity for server and workstation systems. It uses a 240-pin DIMM form factor with a 4Rx4 rank configuration and major brand chips. The module operates at standard 1.5V DDR3 voltage with CL7 latency. It serves as a direct replacement for HP part numbers 501538-001 and 593915-S21.
Registered DDR3 modules at 1.5V draw modest power and run cool inside adequately ventilated server chassis. The ECC and registered design adds minimal overhead compared to unbuffered memory. Noise remains dependent on system fans rather than the memory itself. No additional cooling beyond standard airflow is required for typical workloads.
The combination of ECC error correction and registered buffering is the specification that determines suitability for mission-critical servers. This module provides both features to protect against data corruption and reduce electrical load on the memory controller. Systems requiring non-ECC or unbuffered memory cannot use this part. Verify your platform supports ECC RDIMM before purchase.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3 1066 (PC3 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Power down the server, open the chassis, align the notch on the 240-pin DDR3 module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 16GB registered ECC module is recognised at 1066MHz.
No scheduled maintenance is required; the module uses major-brand chips tested for reliability. Replace only if memory diagnostics report correctable ECC errors that exceed the platform threshold or if a capacity upgrade is needed.
The registered buffer and ECC logic add one cycle of latency, so the practical ceiling is the DDR3 1066MHz bus speed and CL7 timing; sustained throughput cannot exceed the PC3-8500 bandwidth rating.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?