Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3 1066 MHz ECC registered RDIMM with Samsung chips, 4Rx4 quad-rank layout, 240-pin form factor and 1.5 V operation
This 16GB DDR3 registered DIMM carries Supermicro certification and uses Samsung chips in a 4Rx4 quad-rank layout. It runs at 1066MHz with CL3 latency and standard 1.50V voltage. The module targets servers and workstations that require ECC registered memory for data integrity.
Under sustained load the quad-rank organisation keeps all banks active, allowing the memory controller to interleave requests across four ranks per channel. ECC correction operates continuously without halting the pipeline, so throughput remains consistent during long compute jobs or virtualisation workloads.
At 1.50V the module draws typical DDR3 power for its density, and the registered buffer reduces electrical load on the server memory bus. Heat output stays within normal limits for passively cooled DIMM slots, and no additional airflow beyond standard server cooling is required.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR316L-SL02-ER10 |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3 1066 (PC3 8500) |
| Processor | |
| Chipset | Samsung Chipset |
| Memory | |
| CAS latency | CL3 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.5 V |
The module operates at the standard DDR3 voltage of 1.5V. Actual power draw depends on the server workload and the platform's memory controller efficiency.
A DDR3 RDIMM slot that accepts 4Rx4 registered ECC modules at 1066MHz and a BIOS that supports 16GB quad-rank DIMMs.
Mixed-capacity DDR3 RDIMMs can work if the motherboard supports the combined rank count and speed, but the system will run all modules at the slowest rated frequency.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?