Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3 1600 ECC registered DIMM with 2Rx4 organisation for HP server upgrades
This 16GB A-Tech module runs at DDR3 1600 (PC3-12800) with CL11 latency and 1.50V operation. It is a registered ECC DIMM built with major-brand chips for server and workstation reliability. The 240-pin form factor fits compatible HP systems listed by part number.
Suits administrators replacing HP part numbers 672631-S21, 684316-181 or 687465-001 in supported platforms. Builders needing unbuffered UDIMM memory or non-ECC modules for desktop boards cannot use this registered DIMM. Systems limited to lower densities per slot should verify maximum capacity before ordering.
The single decisive specification is the registered ECC DDR3 1600 interface combined with a 2Rx4 rank configuration. Only motherboards that explicitly support registered ECC DDR3 at this speed and rank structure will accept the module. Verify the platform memory specification before purchase.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
The server must support DDR3 1600 (PC3-12800) registered ECC memory at 1.5 V; mixing with slower DDR3 will force the bus to the lowest common speed.
Yes, provided all modules are registered ECC at 1.5 V; the memory controller will train each rank at the lowest populated speed and latency.
Check the BIOS memory information screen or run a tool such as dmidecode to verify speed shows 1600 MT/s, type shows Registered (ECC), and voltage reads 1.5 V.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?