Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 16 GB DDR3 1866 MHz ECC registered DIMM with CL13 latency and 1.5 V operation for server workloads
This 16GB DDR3 1866MHz ECC registered DIMM targets administrators upgrading compatible Samsung part numbers in rackmount or tower servers. The single module uses a 2Rx4 organisation and Major Brand chips to deliver registered error-correcting memory for mission-critical workloads. It operates at the standard DDR3 voltage of 1.5V with a CAS latency of CL13. Buyers needing unbuffered UDIMMs or non-ECC memory for desktop platforms cannot use this module.
The 240-pin DDR3 DIMM slots into registered memory channels on supported server motherboards and requires a chipset that accepts ECC RDIMM topology. Registered buffering reduces electrical load on the memory controller, freeing headroom for higher total system capacities when multiple modules are populated. Systems limited to unbuffered memory or those lacking ECC support will not post with this module installed. Verify the platform qualified vendor list before installation.
Under continuous operation the module maintains the rated 1866MHz data rate and 1.50V supply without throttling, relying on the server chassis airflow for thermal management. ECC circuitry corrects single-bit errors on the fly, preserving data integrity during long compute runs or virtualisation workloads. The 2Rx4 rank structure presents a consistent load profile to the memory controller across extended duty cycles. Workloads demanding higher frequencies or lower latencies than CL13 will not benefit from this specification.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3 1866 (PC3 14900) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL13 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
The module operates at CL13 latency, meaning it waits 13 cycles before delivering data after a read command.
At standard DDR3 1.5V voltage the module draws typical registered DIMM power; exact wattage depends on system load and memory controller efficiency.
It requires a DDR3 240-pin RDIMM slot on a server or workstation board that supports registered ECC memory; consumer boards without registered support will not work.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?