Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3L 1066 registered ECC server DIMM with 4Rx8 organisation and 1.35 V operation
This 16GB registered DIMM uses DDR3L technology at 1066 MHz with a CAS latency of CL7. It operates at 1.35V and features a 4Rx8 organisation built with major brand chips. The module is designed for server and workstation systems requiring error-correcting memory.
Verify that your system accepts DDR3L registered ECC memory in a 240-pin DIMM form factor before ordering. The motherboard must support 1.35V low-voltage operation and registered modules. Confirm the maximum capacity per slot and total system limit using your hardware documentation.
Running at 1.35V, this DDR3L module draws less power and generates less heat than standard 1.5V DDR3 equivalents during normal server workloads. The registered buffer adds minimal latency while improving signal integrity for stable operation. Passive cooling from chassis airflow is typically sufficient.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3L 1066 (PC3L 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx8 |
| Power | |
| Rated voltage | 1.35 V |
The listing is for a single 16GB module; no brackets, cables or extra parts are included.
Check your system manual or current modules for 4Rx8 organisation and registered ECC support; this stick matches that exact layout.
It runs at 1066MHz when the platform supports DDR3L-1066; otherwise the memory controller will clock it down to the highest speed the CPU and chipset allow.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?