Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3L 1066 MHz ECC registered DIMM with 4Rx4 organisation and 1.35 V operation
This 16GB DDR3L RDIMM operates at 1066MHz with CL7 latency and 1.35V low voltage. It uses a 4Rx4 registered ECC design on a 240-pin form factor. The module targets administrators upgrading compatible Dell PowerEdge servers or workstations that require registered error-correcting memory.
The registered buffer reduces electrical load on the memory controller, allowing higher-density configurations in supported platforms. ECC circuitry detects and corrects single-bit errors to protect data integrity. The 1.35V DDR3L specification lowers power draw compared to standard 1.5V DDR3. Verify your system accepts 4Rx4 registered modules before installation.
A single 16GB module expands usable memory for virtualization, databases, or compute workloads. The 4Rx4 organisation may restrict maximum population rules on some motherboards, so consult the vendor documentation for slot limits. Systems capped at lower densities or requiring unbuffered DIMMs cannot use this module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3L 1066 (PC3L 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Yes, the module is rated PC3L-8500 at 1066 MHz and the registered 4Rx4 design matches the Dell part numbers listed, so it will operate at that speed when the platform supports it.
At 1.35 V the DDR3L module draws less power and generates less heat than standard 1.5 V DDR3, making it suitable for 24/7 server operation within normal chassis airflow.
Yes, the module is a 240-pin DDR3L ECC RDIMM, so the motherboard must provide a DDR3L registered DIMM slot with ECC support for it to function.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?