Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3L registered ECC server memory at 1333 MHz with Samsung chips
This 16GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a 2Rx4 registered ECC design on a 240-pin form factor with Samsung chips. The module is Supermicro certified for compatible server platforms.
Registered buffering and ECC correction maintain data integrity during continuous operation. The dual-rank organisation allows the memory controller to interleave accesses across ranks. Low-voltage DDR3L reduces power draw compared to standard DDR3 at the same frequency.
Operating at 1.35V keeps heat output modest inside dense server chassis. Passive cooling via system airflow is sufficient for typical workloads. The registered design adds negligible latency while improving signal integrity on heavily populated channels.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR316L-SV02-ER13 |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Samsung Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.35 V |
The module operates at 1.35V DDR3L low voltage, reducing power draw compared to standard 1.5V DDR3 while maintaining 1333MHz speed and CL9 latency.
A DDR3 240-pin RDIMM slot with registered ECC support is required; the board must accept 2Rx4 dual-rank modules at 1333MHz (PC3-10600).
Yes, if the server supports 16GB density per slot and 2Rx4 organisation at 1333MHz; mixing ranks is allowed but all slots must run at the lowest common speed.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?