Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds 16GB of DDR3L 1333 ECC LRDIMM server memory with 4Rx4 organisation at 1.35V
This 16GB DDR3L 1333 ECC Load Reduced DIMM is built for server and workstation platforms that require registered memory with error correction. The single module operates at 1.35V low voltage and uses a 4Rx4 organisation to deliver 16GB capacity in one 240-pin slot. It serves administrators upgrading compatible systems or replacing failed Hynix HMT42GL7BMR4A-H9 sticks.
The module targets systems that explicitly support DDR3L ECC Load Reduced DIMMs at PC3L-10600 speed. It will not function in consumer desktop motherboards, laptops, or any platform limited to unbuffered non-ECC UDIMMs. Buyers needing standard DDR3 UDIMMs, higher frequencies, or non-ECC memory should select a different product line.
Check the system manual or vendor memory-qualified list to confirm DDR3L 1333 ECC LRDIMM compatibility and maximum supported capacity per slot. Ensure the platform accepts 4Rx4 organisation and 1.35V operation. Confirm an empty 240-pin DIMM socket is available and that the BIOS revision in use recognises Load Reduced modules of this density.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Hynix |
| Model name | HMT42GL7BMR4A-H9 |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Yes, this module is a DDR3L 1333MHz ECC Load Reduced DIMM with a 240-pin interface, so the motherboard must support DDR3L LRDIMM at 1.35V.
No, Load Reduced DIMMs use a different buffering architecture than standard RDIMMs; the memory controller requires all slots to use the same LRDIMM type.
Check the BIOS memory information screen or use a system utility such as CPU-Z to verify the reported speed shows 1333MHz (PC3-10600) and CAS latency of CL9.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?