Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3L 1333 ECC registered server DIMM with 2Rx4 organisation, 1.35 V operation and 240-pin form factor for Dell systems
This 16GB A-Tech DDR3L module runs at 1333MHz with CL9 latency and a low 1.35V operating voltage. It is built as a registered ECC RDIMM using a 2Rx4 configuration on a 240-pin form factor. The stick is designed for Dell servers and workstations that require registered error-correcting memory.
The DDR3L low-voltage design reduces power consumption compared to standard 1.5V DDR3 modules during normal operation. Lower voltage typically results in reduced heat output, which helps maintain stable temperatures inside dense server chassis. Registered buffering adds minimal electrical load to the memory controller.
The module replaces Dell part numbers including A5008568, A5180173, A5816808, A6199967, A7130581, SNPHMNTFC/16G, SNPHMNTGC/16G, SNPMGY5TC/16GWS and SNPYXKF8C/16G. Major-brand chips undergo quality assurance testing to ensure dependable performance in supported systems. Buyers needing unbuffered UDIMMs or non-ECC memory for desktop platforms cannot use this registered server module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Align the single off-centre notch on the 240-pin module with the slot key, press straight down until both side clips click, and ensure the 1.35V DDR3L module seats fully in a DDR3L-capable server slot.
No routine maintenance is required; the module either passes POST or it does not, so replacement only occurs if a memory error appears or capacity needs increase.
The 1333MHz CL9 registered ECC bandwidth ceiling appears first when total memory throughput exceeds the PC3L-10600 data rate during heavy multi-threaded tasks.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?