Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16GB DDR3L 1333 ECC registered server DIMM with 2Rx4 layout and 1.35V low voltage
This 16GB DDR3L 1333MHz registered DIMM delivers error-correcting memory for server and workstation platforms. It operates at 1.35V low voltage with CL9 latency and uses a 2Rx4 organisation on a 240-pin interface. The module replaces specific Hynix part numbers and undergoes quality assurance testing for dependable operation.
This memory fits systems that require DDR3L ECC registered DIMMs and accept 1.35V modules at 1333MHz. It will not work in platforms that need unbuffered UDIMMs, non-ECC memory, standard 1.5V DDR3, or different DDR generations. Builders without registered ECC support should look at other memory types.
The 1x16GB configuration occupies one registered DIMM slot, leaving other slots available for further capacity expansion within the platform limits. The low-voltage DDR3L design reduces power draw per module compared to standard DDR3. Verify your system's qualified vendor list and maximum supported capacity before installation.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Yes, the module is a DDR3L 1333 (PC3L-10600) ECC RDIMM that requires a 240-pin registered DDR3L slot supporting 1.35V operation.
No, registered and unbuffered DIMMs cannot be mixed; the motherboard must support registered memory and all populated slots should use registered modules.
Check the BIOS memory information or run a tool such as dmidecode to verify speed shows 1333 MT/s, voltage reads 1.35V, and ECC status reports enabled.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?