Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3L 1333 ECC registered DIMM with 4Rx4 organisation and 1.35 V low voltage for HP 627818-421 servers
This 16GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V low voltage. It uses a 240-pin registered DIMM layout with 4Rx4 organisation and ECC for error correction. The stick is built with major-brand chips and tested for server and workstation reliability. It serves as a direct replacement for the HP 627818-421 part number.
DDR3L tops out at 1333MHz in this configuration and requires a platform that accepts registered ECC DIMMs at 1.35V. The 4Rx4 density limits how many modules a memory controller can address per channel. Mixing registered and unbuffered DIMMs is not supported. Systems limited to 1.5V standard DDR3 may not recognise the lower voltage modules.
Replacing 4GB or 8GB DDR3 sticks with this 16GB module quadruples capacity per slot while adding ECC protection. The jump is worth it when workloads exceed current memory headroom or when data integrity becomes a requirement. It does not suit platforms that only accept unbuffered non-ECC memory or that cap DIMM size below 16GB.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.35 V |
This listing is a single 16GB DDR3L 1333 ECC RDIMM module (1x 16GB). If your system has free 240-pin slots and supports 16GB per rank, one module works; otherwise match your platform's supported configuration.
The module transfers data at 1333 MT/s with CL9 timing at 1.35V. Real-world bandwidth depends on your server's memory controller and how many channels it populates.
No. This is a registered (RDIMM) 4Rx4 module with ECC, designed for server chipsets that support registered memory. Desktop boards typically require unbuffered non-ECC DIMMs and will not post with this module.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?