Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16GB DDR4 2133MHz ECC registered server memory module with CL15 latency
This registered ECC module provides 16GB of DDR4 memory at 2133MHz with CL15 latency. It is built for servers and workstations that require error-correcting registered DIMMs for data integrity. The 2Rx4 organisation uses major-brand chips on a 288-pin PCB. It operates at the standard 1.20V DDR4 voltage.
The module plugs directly into any server or workstation motherboard that accepts DDR4 288-pin registered ECC DIMMs. No extra cables or brackets are required. Because it is a single 16GB stick, it leaves remaining slots free for future capacity expansion. Verify your platform's qualified-vendor list before installation.
This A-Tech part is a compatible equivalent for the Micron MTA36ADS2G72PZ-2G1, MTA36ASF2G72PZ-2G1, MTA36ASF2G72PZ-2G1A2 and MTA36ASF2G72PZ-2G1B1 modules. The upgrade is worthwhile when a system needs registered ECC memory at this exact speed and rank configuration. It is not suitable for platforms that require unbuffered non-ECC UDIMMs or faster DDR4 data rates.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.2 V |
The module operates at the standard DDR4 voltage of 1.20V; actual power draw depends on your platform's memory controller and workload.
The memory has no moving parts and generates minimal heat at 1.20V; system fans determine overall noise and temperature.
It needs a DDR4 288-pin RDIMM slot on a server or workstation board that supports ECC registered memory.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?