Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 2133 MHz ECC unbuffered DIMM with CL15 latency for server and workstation upgrades
This A-Tech module delivers 16GB of DDR4 2133MHz memory with ECC error correction and CL15 latency. It operates at the standard 1.20V and uses a 2Rx8 unbuffered design. The 288-pin DIMM is built as a compatible replacement for Kingston KTD-PE421E/16G and KVR21E15D8/16I modules. It targets administrators upgrading or repairing server and workstation platforms that require ECC unbuffered memory.
The module matches the 16GB capacity, 2133MHz speed, CL15 timing and 1.20V voltage of those Kingston parts. It serves as a direct substitute when original modules are discontinued or when expanding capacity within the same specification. The jump is worthwhile when your system reports correctable memory errors or when workloads exceed the current installed memory limit.
Installation follows standard UDIMM procedure: power down, open the chassis, align the 288-pin edge connector with the slot, and press until the retention clips engage. What usually goes wrong is a mismatch between registered and unbuffered memory types or exceeding the platform's maximum supported speed per channel. Verify that your motherboard accepts unbuffered ECC DDR4 before ordering.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Kingston |
| Model name | KTD-PE421E/16G, KVR21E15D8/16I |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
This module uses the standard 288-pin DDR4 UDIMM form factor and 1.20V voltage, so it fits any server or workstation board that accepts unbuffered ECC DDR4 DIMMs.
Align the notch with the slot key, press straight down until both side clips click, then verify the system reports 2133 MHz and ECC active in BIOS.
Replace it if memory diagnostics report correctable errors rising over time, or when you upgrade to a platform that requires faster than 2133 MHz or registered DIMMs.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?