Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16GB DDR4 2666MHz ECC registered DIMM adds 1Rx4 server memory with 1.2V operation and CL19 latency
This 16GB DDR4 2666MHz ECC RDIMM module uses a registered design with 1Rx4 organisation and CL19 latency. It operates at the standard 1.20V DDR4 voltage and fits 288-pin DIMM slots. The module targets servers and workstations that require error-correcting registered memory for stable operation.
The module serves as a compatible equivalent for HP part numbers 815098-S21, 850880-001 and 872837-091. It upgrades systems originally configured with lower-capacity or slower DDR4 registered DIMMs. The jump is worth it when the platform supports 2666MHz registered ECC memory and the workload demands higher single-module density.
Registered DIMMs require a memory controller that supports buffered operation and cannot be mixed with unbuffered modules in the same channel. The DDR4 2666MHz speed ceiling is set by the platform's memory controller; faster modules will downclock to the highest supported rate. Buyers needing non-ECC or unbuffered memory for desktop platforms cannot use this module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.2 V |
Yes — the module uses the standard DDR4 DIMM 288-pin form factor that matches the slots in HP systems designed for 815098-S21, 850880-001 or 872837-091 memory.
Install the DIMM with the server powered off; most HP platforms auto-detect the 2666 MHz CL19 1.20 V registered ECC timings, but verify the memory mode in BIOS if the system does not show the full 16 GB.
The module is rated for continuous server operation at 1.2 V DDR4 standard voltage; plan replacement only if diagnostics report correctable ECC errors rising or the system fails memory tests.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?