Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 16 GB DDR4 3200 ECC registered DIMM with CL22 latency and 1.2 V operation for server and workstation upgrades
This 16GB DDR4 3200 ECC RDIMM module is built for server and workstation systems that require registered memory with error correction. The 2Rx8 organisation and CL22 latency at 1.20V match the Hynix HMAG78EXNRA specification. It is a direct replacement part for that model.
The module replaces non-ECC UDIMMs or slower DDR4 RDIMMs in platforms that support registered ECC memory. The jump is worth it when your workload demands data integrity and the motherboard accepts 288-pin RDIMMs at 3200 MT/s. Systems limited to UDIMM slots or lower speeds cannot use this module.
Verify that your motherboard or server chassis lists DDR4 3200 RDIMM support and has an available 288-pin DIMM slot. Confirm the maximum capacity per slot and the total number of slots populated, as some platforms restrict rank count or total memory. The 262-pin form factor noted in the supplier data refers to SO-DIMM; this product is a 288-pin RDIMM.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Hynix |
| Model name | HMAG78EXNRA |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
The module uses the standard 288-pin DDR4 DIMM form factor and requires a slot that accepts registered ECC memory at 1.2 V.
Align the notch with the key, press firmly until both retention clips click, and verify the system recognises the full 16 GB at 3200 MHz.
Replace the module if the system logs corrected ECC errors that increase over time, or if memory diagnostics report uncorrectable failures.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?