Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 3200 MHz ECC registered dual-rank server module, Supermicro certified with Micron chips
This 16GB DDR4 3200MHz ECC RDIMM module uses Micron chips and runs at PC4-25600 speed with CL22 latency. It is a 2Rx8 dual-rank registered DIMM operating at 1.20V. The module carries Supermicro certification for verified compatibility with qualified Supermicro platforms.
This module fits systems that require registered ECC DDR4 memory in a 288-pin RDIMM form factor. It is not suitable for desktop or laptop platforms that accept only unbuffered non-ECC UDIMMs. Buyers whose motherboards lack registered DIMM support should look at a different memory type.
The 16GB capacity provides headroom for virtualization, database, or compute tasks that benefit from ECC protection and registered signalling. A single module leaves additional slots open for further expansion. Systems needing more than 16GB per channel or higher memory density will require additional or larger modules.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR416LD-ER32 |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Micron Chipset |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Yes, the module uses the standard 288-pin DDR4 RDIMM form factor and is rated for 3200 MHz (PC4-25600) at 1.2 V, so it will install and operate at that speed in any compatible 288-pin DDR4 slot.
Mixing ranks is often supported, but the memory controller will run all populated channels at the lowest common speed and may require specific slot population rules — check your system or motherboard manual for approved rank-mixing configurations.
Enter the BIOS/UEFI or use a tool such as dmidecode, CPU-Z or IPMI to verify the reported speed shows 3200 MHz (PC4-25600) and that ECC status reads "Enabled" or "Corrected Errors" counters are present.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?