We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR5 4800 ECC UDIMM 1Rx8 Server Memory

SKU CH-2NA6-TZNG8

16 GB DDR5 4800 ECC unbuffered UDIMM with CL40 latency for server upgrades

  • Total capacity16 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMicron Chipset
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeUnbuffered
  • 16GB DDR5 capacity handles demanding server workloads
  • ECC unbuffered design protects data integrity in critical systems
  • 4800MHz speed with CL40 latency delivers responsive performance
  • 10V standard voltage ensures efficient power consumption
  • 288-pin DIMM form factor fits compatible DDR5 server slots

A-Tech 16GB DDR5 4800 ECC UDIMM

This A-Tech module is a 16GB DDR5 4800 ECC unbuffered DIMM built as a compatible replacement for the Micron MTC10C1084S1EC48BA1. It targets server and workstation operators who need dependable memory upgrades for supported platforms. The unit ships new and carries the supplier’s lifetime warranty.

ECC unbuffered DDR5 4800 single rank

The single specification that decides fit is the ECC unbuffered DDR5 4800 configuration with a 1Rx8 organisation. Your motherboard must explicitly support ECC unbuffered DDR5 at this speed and rank layout; registered or non-ECC boards will not accept it.

Straightforward DIMM install

Installation follows the standard 288-pin DIMM procedure: power down, open the chassis, align the notch, and press until the latches click. The usual problem is purchasing for a system that requires registered DIMMs or non-ECC memory, so verify the platform’s qualified vendor list before ordering.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $387.99
Pricier than about 65% of the 6,523 comparable items (median $188.99).
Total capacity 16 GB
Lower than about 60% of the 6,064 comparable items (median 32 GB).
Price per GB $24.25 per GB
Pricier than about 85% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Product lineCompatible Replacement for Micron
Model nameMTC10C1084S1EC48BA1
Total capacity16 GB
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMicron Chipset
Memory
CAS latencyCL40
ECC supportYes
Buffer typeUnbuffered
Memory rank1Rx8 (EC4)
Power
Rated voltage1.1 V

Questions about this item

What does the 4800 speed rating mean once this DDR5 module is installed in a server?

The module runs at DDR5 4800 (PC5-38400) with CAS latency 40, delivering its rated data rate when the platform enables that speed.

How does the DDR5 4800 (PC5-38400) interface cap real-world performance?

DDR5 4800 sets the maximum data rate at 4800 MT/s; actual throughput depends on the memory controller and system configuration.

What physical slot and clearance does this 288-pin UDIMM need to fit?

It requires a standard 288-pin DDR5 UDIMM slot and fits the 262-pin form factor used in compatible server and workstation boards.

More in ECC Server RAM

Similar items