Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR3 1066 MHz ECC registered DIMM with 4Rx4 organisation for HP server upgrades
This 32GB DDR3 module runs at 1066MHz (PC3-8500) with CL7 latency and 1.50V operation. It is an ECC registered DIMM built in a 4Rx4 configuration using major-brand chips on a 240-pin form factor. The module is a compatible replacement for HP part numbers 627814-B21, 628975-081 and 632205-001.
This module suits IT teams upgrading or repairing compatible HP servers and workstations that accept DDR3 1066MHz ECC registered DIMMs. It is not for desktop PCs or consumer laptops that require unbuffered non-ECC memory. Buyers whose systems need a different DDR3 speed, a different rank layout, or a different voltage should verify the platform specification before ordering.
The 4Rx4 rank structure counts as four logical ranks per module, which affects how many DIMMs the memory controller can address per channel. Check the server documentation for maximum supported ranks per channel and total system capacity to ensure this 32GB module fits the allowed configuration.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 32 GB |
| Performance | |
| Rated speed | DDR3 1066 (PC3 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Yes, this is a 240-pin DDR3 DIMM running at 1066 MHz (PC3-8500) with 1.5 V registered ECC; your motherboard must provide a matching DDR3 RDIMM slot.
Mixing ranks is possible if the platform supports 4Rx4 modules, but the memory controller will run all modules at the lowest common speed and voltage; check the system manual for maximum rank-per-channel limits.
Enter the BIOS or run a hardware-inventory tool such as dmidecode; it should report a single 32 GB DDR3-1066 registered ECC DIMM at 1.5 V with the correct part number.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?