Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR3L 1600 ECC LRDIMM module with 4Rx4 organisation and 1.35 V operation
This 32GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35V operation. It uses a 4Rx4 Load Reduced DIMM design with ECC for data integrity. The 240-pin form factor fits compatible server and workstation boards.
The module is built as a compatible equivalent for Samsung M386B4G70DM0-YK03, M386B4G70DM0-YK04 and M386B4G70BM0-YK00 part numbers. It uses Samsung chipset components and undergoes quality assurance testing. Builders who need a second DIMM to populate a multi-channel configuration must source an additional module separately.
The Load Reduced architecture reduces electrical load on the memory bus, allowing higher capacity per slot in supported platforms. ECC circuitry corrects single-bit errors during operation. Systems that do not support DDR3L LRDIMM or 4Rx4 organisation will not accept this module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Samsung |
| Model name | M386B4G70DM0-YK03, M386B4G70DM0-YK04, M386B4G70BM0-YK00 |
| Total capacity | 32 GB |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Samsung Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.35 V |
The 4Rx4 LRDIMM design reduces electrical load on the memory controller, allowing higher capacity per channel, but slot population rules depend on the server platform; consult your system documentation for supported configurations.
The DDR3L 1600 PC3L-12800 interface provides a peak transfer rate of 12800 MB/s; sustained throughput will be lower and varies with workload, controller efficiency and CAS latency CL11 timing.
At 1.35V the DDR3L module draws less power than standard 1.5V DDR3, reducing heat output; exact thermal load depends on system airflow, ambient temperature and memory controller activity.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?