Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR4 2133 MHz ECC LRDIMM server memory with CL15 latency and 1.2 V operation
This 32GB module uses DDR4 2133MHz with CL15 latency and 1.2V operation. It is built as an ECC Load Reduced DIMM in a 4Rx4 configuration on major brand chips. The 288-pin form factor fits server and workstation platforms that require registered memory with error correction.
The module is a compatible equivalent for Dell part numbers including 370-ABUH, 370-ABUL, 370-ABXL, A7910489, A7945725, MMRR9, SNP2133D4L15/32G, SNPMMRR9C/32G and SNPPR5D1G/32G. The upgrade is worthwhile when a system needs higher capacity per slot or when replacing failed modules in qualified Dell servers and workstations.
Installation follows normal server memory procedures: power down, open the chassis, align the notch and press until the latches lock. The most common issue is mixing LRDIMM with standard RDIMM or UDIMM in the same channel, which prevents the system from posting. Verify the platform supports Load Reduced memory before fitting.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 32 GB |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.2 V |
Yes, the module uses the 288-pin DDR4 DIMM form factor required for LRDIMM slots in compatible Dell servers.
Align the notch with the slot key, press straight down until both side clips click, then verify 1.2 V operation in BIOS.
Replace if the system logs recurring correctable ECC errors or fails memory diagnostics during scheduled maintenance.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?