Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 32 GB DDR4 2400 MHz ECC load-reduced DIMM with 4Rx4 organisation, CL17 latency and 1.2 V operation for server memory expansion
This 32GB DDR4 2400MHz ECC LRDIMM module delivers 32GB of registered server memory in a single 288-pin DIMM. It operates at PC4-19200 speed with CL17 latency and 1.20V standard voltage. The 4Rx4 load-reduced design targets enterprise servers and workstations that require high-capacity, error-correcting memory.
This module serves as a compatible replacement for Samsung M386A4G40DM1-CRC and M386A4G40EM2-CRC part numbers. The upgrade is worth it when your system supports DDR4 LRDIMM topology and needs maximum density per slot. Verify your platform's qualified vendor list before installation to ensure proper operation.
This memory suits administrators expanding capacity in compatible DDR4 LRDIMM platforms. It is not for systems limited to standard RDIMM or UDIMM form factors. Buyers who need non-ECC memory, different voltage requirements, or higher frequency modules should look at alternative configurations.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 32 GB |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.2 V |
Yes, the module uses the standard DDR4 288-pin DIMM form factor and requires a motherboard slot that supports Load Reduced DIMMs at 1.2V.
Align the notch with the slot key, press firmly until both side clips click shut, then verify the system recognises the full 32GB capacity and ECC function in BIOS.
Replace the module if the system logs uncorrectable ECC errors, fails memory diagnostics, or becomes unstable under load despite passing initial tests.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?