Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR4 2666 MHz ECC registered DIMM with CL19 latency and 1.2 V operation for HP server upgrades
This 32 GB DDR4 2666 MHz registered DIMM delivers error-correcting memory for HP server and workstation platforms. It operates at 1.20 V with CL19 latency and a 2Rx4 organisation using major-brand chips. The module suits administrators who need validated capacity expansion for compatible HP systems.
Registered buffering and ECC circuitry maintain data integrity during continuous multi-threaded workloads such as virtualisation, database serving or render farms. The single 32 GB stick populates one 288-pin slot without increasing per-module power draw beyond the standard DDR4 voltage.
DDR4 2666 represents the upper JEDEC speed tier for this generation, so the module cannot exceed PC4-21300 bandwidth on any platform. Systems limited to lower DDR4 frequencies will down-clock the DIMM automatically, and boards that require unbuffered UDIMMs or a different rank configuration will not accept it.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 32 GB |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.2 V |
The module runs at the standard DDR4 voltage of 1.20V, keeping power draw low for continuous server workloads.
A DDR4 RDIMM-compatible 288-pin DIMM slot on a server or workstation motherboard that supports registered ECC memory is required.
Mixing ranks is often possible, but the system BIOS and memory controller must support the combined rank population; verify the platform's qualified vendor list first.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?