Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR5 4800 MHz ECC UDIMM module with 2Rx8 organisation and 1.10 V operation
This 32GB DDR5 4800MHz ECC UDIMM uses a 2Rx8 layout and runs at 1.10V. It is built for servers and workstations that require error-correcting memory in an unbuffered form factor. The module fits standard 288-pin DDR5 slots and replaces the Hynix HMCG88AEBEA part.
Error-correcting code detects and corrects single-bit errors during continuous operation, preventing data corruption under heavy memory loads. The 2Rx8 organisation allows the memory controller to interleave accesses across ranks, helping maintain throughput during long-running tasks. CAS latency of 40 cycles is consistent with DDR5-4800 JEDEC timing.
This module is unbuffered ECC UDIMM, so it only works in platforms that explicitly support unbuffered ECC memory. Registered or fully buffered systems cannot use it, and consumer boards without ECC support will not enable the error-correction function. Verify your motherboard or server manual lists unbuffered ECC UDIMM compatibility before purchase.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Hynix HMCG88AEBEA |
| Model name | A-Tech 32 GB DDR5-4800 ECC UDIMM Server RAM Module |
| Total capacity | 32 GB |
| Product type | 288-Pin DDR5 SDRAM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | 40 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
The module operates at the standard DDR5 voltage of 1.10V. Actual power draw depends on the platform's memory controller and workload; the module itself has no separate power rating.
You need a motherboard with a 288-pin DDR5 UDIMM slot that supports ECC unbuffered memory. Check your system manual for qualified memory lists and channel population rules.
The module is rated for DDR5 4800 (PC5-38400) at CL40. If mixed with slower DDR5, the system will clock all modules to the lowest common speed and loosest timings.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?