Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR3 1066MHz ECC registered DIMM with Micron chips for server upgrades
This A-Tech 4GB DDR3 module runs at 1066MHz with PC3-8500 bandwidth and CL7 latency. It is a registered ECC DIMM built for server and workstation platforms that require error correction and signal buffering. The 240-pin form factor operates at standard 1.5V DDR3 voltage.
Suits administrators expanding capacity in systems validated for DDR3 registered ECC memory with 4Rx8 organisation. Not suited for desktop boards that accept only unbuffered non-ECC modules or for platforms limited to lower-rank configurations. Verify your system's qualified vendor list before ordering.
The package contains a single qualified memory module tested to Micron MT36JSZF51272PDZ-1GF1D equivalence. No cables, brackets or software are included; the upgrade effect comes entirely from adding registered ECC capacity to a compatible motherboard.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1066 (PC3 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx8 |
| Power | |
| Rated voltage | 1.5 V |
Yes, the module is a 240-pin DDR3 DIMM rated for 1066 MHz PC3-8500, so it installs directly into any DDR3 server slot that accepts registered ECC memory.
No, registered and unbuffered DIMMs cannot be used together; the memory controller will not initialise a mixed configuration.
Check the BIOS memory information or run a tool such as CPU-Z; it should report 1066 MHz, CL7 timings, 1.50 V and ECC enabled.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?