Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR3 1333 ECC registered DIMM for server and workstation memory upgrades
This 4GB DDR3 1333 module is built for servers and workstations that require ECC registered memory. It replaces Kingston part numbers KTD-PE313S/4G, KTH-PL313S/4G and KTM-SX313S/4G. The single-rank 1Rx4 design fits standard 240-pin DIMM slots in compatible systems.
The PC3-10600 standard caps bandwidth at the rated 1333 MT/s with CL9 latency and 1.50V operation. Registered buffering adds a clock cycle for signal integrity on heavily populated motherboards. Systems limited to lower DDR3 speeds or non-ECC unbuffered memory cannot use this module.
The defining specification is the registered ECC RDIMM architecture. Buyers whose platforms accept only unbuffered non-ECC UDIMMs or load-reduced LRDIMMs will find this module incompatible. Always verify the motherboard manual calls for registered ECC DDR3 before ordering.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.5 V |
This module provides 4 GB in a single 240-pin registered DIMM. If your system has free slots and supports larger densities per slot, you can add multiple 4 GB sticks or select higher-capacity modules instead.
PC3-10600 indicates a peak transfer rate of 10 600 MB/s at 1333 MHz. The registered buffer and ECC add a small latency overhead but provide error correction and signal stability for server workloads.
The module runs at the standard DDR3 voltage of 1.5 V and 1333 MHz with CL9 timing. The registered design and ECC function within this voltage envelope, so the interface operates at its rated speed without overvolting.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?