Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR3 1333MHz ECC registered DIMM with CL9 latency and 1.5V operation for compatible IBM-Lenovo servers
This 4GB registered DIMM is built for IBM-Lenovo servers and workstations that require DDR3 1333 ECC memory. It replaces part numbers 43X5047, 44T1473, 46C0591, 47J0156, 49Y1430 and 67Y0016. The module uses a 2Rx4 organisation and major-brand chips. Buyers needing higher density per slot or non-ECC memory should look elsewhere.
The DDR3 1333 standard tops out at 10600 MB/s theoretical bandwidth with a CL9 latency at 1.50V. Registered buffering adds one clock cycle of delay but allows the memory controller to drive more modules per channel. Systems limited to lower DDR3 speeds will downclock this module automatically. Boards that only accept unbuffered UDIMMs cannot use this part.
The dual-rank 2Rx4 layout counts as two logical ranks per module, which affects the maximum number of DIMMs a memory controller can support per channel. Consult the server documentation for rank limits before populating all slots. Exceeding the rank limit will prevent the system from posting or reduce the operating speed.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
This listing is for a single 4GB DDR3 1333 ECC RDIMM. Select it if your server needs a 4GB registered module; otherwise choose a capacity that matches your system's supported configuration.
The module runs at DDR3 1333 (PC3-10600) with CL9 latency at 1.50V, delivering the rated throughput for compatible IBM-Lenovo servers that support this speed grade.
Yes, the 240-pin DDR3 DIMM interface caps transfer rates at the PC3-10600 level, so the module cannot exceed the 1333MHz data rate even if the memory controller supports higher speeds.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?