Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 4 GB DDR3 1333 MHz registered ECC DIMM for Samsung M393B5170 server memory upgrades
This 4GB DDR3 1333MHz ECC registered DIMM replaces Samsung M393B5170 series modules in compatible servers and workstations. It delivers error-correcting code protection and registered buffering for stable operation in multi-module configurations. The single 4GB stick suits administrators expanding memory capacity on supported platforms.
The module uses a 240-pin DIMM form factor with major-brand chips and a 2Rx4 rank organisation. Registered signalling reduces electrical load on the memory controller while ECC detects and corrects single-bit errors. Standard 1.5V DDR3 voltage ensures compatibility with DDR3 server boards that accept registered memory.
Verify that your system supports DDR3 1333MHz PC3-10600 ECC registered DIMMs and accepts 2Rx4 modules before ordering. Confirm the motherboard or server documentation lists the Samsung M393B5170 part numbers as qualified memory. This module is not for desktop boards that require unbuffered non-ECC memory or a different DDR generation.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
The module operates at DDR3 1333 MHz, also labelled PC3-10600, which delivers a peak transfer rate of 10600 MB/s in a server or workstation.
It needs a standard DDR3 DIMM slot with 240 pins; the registered design and 1.5 V voltage match server and workstation boards that accept ECC RDIMM modules.
Power down the system, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the ECC registered memory is detected at the correct speed.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?