Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR3 1333MHz ECC registered DIMM with 2Rx4 organisation for server upgrades
This 4 GB DDR3 registered DIMM operates at 1333 MHz with CL9 latency and 1.5 V power. It uses a 2Rx4 organisation and carries ECC for error correction in server and workstation platforms. The module is built as a compatible equivalent for the Hynix HMT351V7BMR4C-H9 part number. All units are tested for reliability before shipment.
Administrators upgrading or repairing systems that require registered ECC memory at the PC3-10600 speed grade will find this module a direct fit. Builders whose platforms accept only unbuffered UDIMMs, or those requiring a different voltage, speed, rank configuration or DDR generation, should select a module matching those specifications. Verify the motherboard qualified-vendor list before ordering.
The registered buffer and ECC circuitry allow the memory controller to address larger capacities while detecting and correcting single-bit errors. Systems that mandate registered DIMMs and a 2Rx4 rank layout will recognise this module; platforms limited to unbuffered memory or a different rank structure will not support it. Check the system documentation for the required registration and rank combination.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Hynix |
| Model name | HMT351V7BMR4C-H9 |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
The 240-pin DDR3 DIMM socket is a passive connector rated for many insertion cycles; it does not wear out under normal server operation and requires no scheduled replacement.
The CL9 latency at 1333 MHz sets the maximum sustained bandwidth; the memory controller cannot push data faster than the rated PC3-10600 ceiling.
At 1.5 V the module draws standard DDR3 power; registered ECC operation adds minimal overhead, so a normal server airflow path keeps temperatures within spec.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?