Crucial CT32G56C46S5 32GB DDR5 5600 CL46 262-pin SO-DIMM laptop RAM
- 32 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR3 1333MHz SODIMM laptop memory module compatible with HP part numbers 593896-001 and 593994-001
This A-Tech module is a 4 GB DDR3 SO-DIMM built to replace HP part numbers AT913UT#ABA, 593896-001 and 593994-001. It targets owners of compatible HP laptops, notebooks or all-in-one systems who need a straightforward memory replacement. The stick is unbuffered, non-ECC and runs at the standard 1.50 V DDR3 voltage. Buyers who need higher capacities or newer memory generations should look elsewhere.
The single 4 GB rank operates at 1333 MHz (PC3-10600) with CL9 latency, giving a modest boost for everyday multitasking and office workloads. It will handle light productivity and web browsing comfortably but runs out of headroom with memory-hungry applications, large datasets or modern gaming. Systems requiring more than 4 GB per slot or faster transfer rates cannot use this module.
With no heat spreader and a low 1.50 V operating voltage, the module draws minimal power and produces little heat during normal use. Passive cooling inside a typical laptop chassis is sufficient; there is no fan noise because the stick has none. The unbuffered design keeps electrical load on the memory controller light, contributing to stable operation in supported HP platforms.
Measured against everything we stock in Laptop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for HP |
| Model name | AT913UT#ABA, 593896-001, 593994-001 |
| Total capacity | 4 GB |
| Product type | 204-Pin DDR3 SO-DIMM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Memory | |
| CAS latency | CL9 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Recommended for | Compatible Replacement for HP AT913UT#ABA, 593896-001, 593994-001 |
The module operates at DDR3 1333MHz (PC3-10600) with CL9 latency and 1.5V voltage. When mixed with slower DDR3 memory, the system will typically run all modules at the lowest common speed and timing.
Check the system BIOS or use a tool like CPU-Z to verify the memory shows 4GB capacity, DDR3 type, 1333MHz frequency, and CL9 timings at 1.5V.
The box contains only the 4GB DDR3 1333MHz 204-pin SODIMM module. No tools, cables, or adapters are included; installation requires only a compatible laptop slot and a small screwdriver.
More in Laptop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?