Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR3 1600 ECC registered DIMM with CL11 latency and 1.5V operation for Dell server upgrades
This 4GB DDR3 1600 module is a registered ECC DIMM built for server and workstation platforms that require error-correcting memory. It runs at PC3-12800 speed with CL11 latency at the standard 1.5V voltage. The 2Rx8 organisation uses major-brand chips and a 240-pin form factor.
This module suits administrators replacing Dell parts such as A6996786 or SNPD65JJC/4G in compatible PowerEdge or Precision systems. Builders whose motherboards accept only unbuffered non-ECC UDIMMs should look elsewhere, as registered ECC memory will not function in those platforms.
The single specification that determines fit is the registered ECC RDIMM design combined with a 2Rx8 rank structure. Only systems that explicitly support registered ECC DDR3 DIMMs at 1600 MT/s can use this module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.5 V |
No — the module is a registered DIMM (RDIMM) and requires a motherboard that supports registered memory; it will not work in a UDIMM-only slot.
No — registered ECC modules cannot be mixed with unbuffered non-ECC memory; the board must support registered ECC and all populated slots should use matching RDIMMs.
Check the BIOS or a tool such as CPU-Z — it should report 1600 MT/s, CL11 timings and 1.5 V for this module.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?