Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR3 1600MHz ECC UDIMM module with CL11 latency and 1.5V operation for compatible server systems
This 4GB DDR3 1600MHz module adds ECC unbuffered memory to compatible server and workstation systems. It runs at PC3-12800 speed with CL11 latency and standard 1.50V voltage. The single 240-pin DIMM uses a 2Rx8 rank organisation and major-brand chips for stable operation in always-on environments.
The UDIMM form factor plugs directly into standard DDR3 DIMM slots without a register buffer, keeping latency low for single-socket platforms. Gold-edge contacts on the 240-pin interface ensure reliable seating and signal integrity over repeated insertions. Unbuffered design means the memory controller drives each chip directly, so populate slots according to your system manual for best stability.
Confirm your motherboard or server accepts DDR3 ECC unbuffered DIMMs at 1600MHz and 1.50V. Check the maximum capacity per slot and total system limit in the vendor documentation. This module replaces IBM-Lenovo part numbers 0B47377, 00D4957, 00D4955 and 47J0180, but cross-reference your exact model to avoid mismatched rank or voltage requirements.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.5 V |
The DDR3 1600 (PC3-12800) interface delivers up to 12800 MB/s theoretical bandwidth, capped by the 1600 MHz clock and 240-pin DIMM bus width.
It fits a standard DDR3 240-pin UDIMM slot; the unbuffered ECC module uses 1.5V and Major Brand Chips, so ensure the motherboard supports ECC UDIMM, not registered DIMMs.
Power off the server, open the chassis, align the notch on the 240-pin DIMM with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC is enabled and the 4GB module shows at 1600 MHz CL11.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?