Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Registered ECC DDR3L 1333 RDIMM with 1.35 V low voltage for server workloads
This 4 GB registered DIMM runs at 1333 MHz with CL9 latency and operates at 1.35 V. It uses a 1Rx4 organisation and major-brand chips on a 240-pin module. The stick is built for server and workstation platforms that require error-correcting registered memory.
It matches the Samsung M392B5270CH0-YH9, M392B5270DH0-YH9, M393B5270CH0-YH9 and M393B5270DH0-YH9 part numbers. The upgrade is worth it when a system shows memory errors, needs ECC protection for data integrity, or requires registered modules to populate all DIMM slots.
The module needs a motherboard that accepts DDR3L registered DIMMs at 1.35 V and provides 240-pin sockets. It frees a standard-voltage slot for lower power draw and leaves the remaining banks open for additional registered modules of the same specification. Builders who need unbuffered memory or a different voltage cannot use this part.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.35 V |
The module uses the standard 240-pin DDR3 DIMM form factor and 1.35V low-voltage operation, so it fits any server or workstation slot designed for DDR3L 1333 registered ECC memory.
Power down the system, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 4GB 1Rx4 module is detected at 1333 MHz.
Replace the module if memory diagnostics report correctable ECC errors that become uncorrectable, if the system fails POST with beep codes indicating memory failure, or if you upgrade to a platform that requires a higher capacity or different DDR generation.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?