Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 4GB DDR3L 1333 ECC registered DIMM with 1.35V low-voltage operation for IBM-Lenovo servers
This 4GB DDR3L registered DIMM runs at 1333MHz with a low 1.35V voltage and CL9 latency. It uses a 2Rx4 organisation and major-brand chips on a 240-pin form factor. The module is built as a direct replacement for IBM-Lenovo part numbers 46C0567, 47J0133, 49Y1394 and 49Y1412. It targets server and workstation administrators who need validated ECC memory for supported platforms.
This module fits systems that specifically require DDR3L registered ECC memory at 1333MHz. It is not for desktops or laptops that accept only unbuffered non-ECC UDIMMs. It will not work in platforms limited to 1.5V DDR3 or those that cannot address registered modules. Buyers needing higher capacity per slot or a different voltage should verify their hardware documentation before ordering.
The defining specification is the registered ECC design combined with a 2Rx4 rank structure at 1.35V. This combination determines whether the memory will initialise in your server's memory controller. Match the part numbers listed — 46C0567, 47J0133, 49Y1394, 49Y1412 — against your system's qualified vendor list to confirm compatibility.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Yes, the module is rated at DDR3L 1333 (PC3L-10600) so the maximum data rate is 1333 MT/s when installed in a compatible server.
It requires a standard DDR3 240-pin DIMM socket on the server motherboard; the registered design will not work in unbuffered desktop slots.
Power down the server, open the chassis, align the notch on the 240-pin module with the key in the slot, press firmly until both retention clips click, then verify in BIOS that ECC and registered mode are enabled.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?