Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR3L 1600 ECC unbuffered DIMM built as a Samsung M391B5173EB0-YK0 and M391B5173QH0-YK0 equivalent at PC3L-12800 speed
This 4GB DDR3L 1600 module adds error-correcting memory to compatible servers and workstations. It runs at 1.35V with CL11 latency in a single-rank 1Rx8 layout. The 240-pin unbuffered DIMM fits standard DDR3 slots that accept low-voltage ECC UDIMMs.
The stick is validated as a compatible equivalent for Samsung M391B5173EB0-YK0 and M391B5173QH0-YK0 part numbers. Major-brand chips are used throughout and every unit undergoes quality-assurance testing before shipment. This reduces the risk of mismatched timings or voltage when swapping out original Samsung memory.
The module uses one rank of eight-bit-wide chips with ECC parity and no register buffer. Systems that require registered DIMMs or dual-rank population rules will not accept this module. Verify the motherboard manual for UDIMM-only slots and maximum rank-per-channel limits before ordering.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.35 V |
The module uses major-brand DRAM chips tested to A-Tech quality standards and carries a lifetime warranty; no scheduled chip replacement is required.
The CL11 CAS latency at 1600 MHz sets the timing boundary, while the 1.35 V DDR3L voltage ceiling defines the thermal envelope.
At 1.35 V the low-voltage DDR3L design draws less power and generates less heat than standard 1.5 V DDR3, keeping thermals modest in a 240-pin slot.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?