Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR3L 1600 ECC unbuffered DIMM with 2Rx8 organisation and 1.35V low-voltage operation
This A-Tech 4 GB module is a direct equivalent for Hynix HMT351U7CFR8A-PB and HMT351U7EFR8A-PB parts. It targets administrators who need to add or replace DDR3L ECC memory in compatible server or workstation platforms without changing voltage or form factor.
The stick uses a standard 240-pin DIMM edge connector and operates at 1.35 V, matching the low-voltage DDR3L specification. Unbuffered ECC topology with 2Rx8 organisation means it slots straight into boards that accept UDIMM ECC modules, leaving registered DIMM slots for other configurations.
Replacing non-ECC DDR3L UDIMMs with this module adds error correction for data integrity in always-on workloads. The jump is worthwhile when the platform supports ECC UDIMM and the current population leaves free 240-pin slots for the 4 GB capacity increase.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.35 V |
This module uses the DDR3L standard at 1600 MHz with a PC3L-12800 rating, capping the peak transfer rate at that specification.
It fits a standard DDR3 DIMM slot with 240 pins and the low-profile UDIMM form factor used in servers and workstations.
Power down, open the chassis, align the notch on the 240-pin edge connector with the slot key, press firmly until both retention clips click, then enable ECC in the system BIOS.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?