Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR4 2133 ECC UDIMM 1Rx8 module for HP servers, 288-pin DIMM at 1.2V CL15
This 4GB DDR4 module operates at 2133MHz with CL15 latency and 1.20V standard voltage. It uses ECC UDIMM unbuffered architecture with a 1Rx8 rank configuration and 288-pin form factor. The module serves as a direct replacement for HP part numbers 797257-081, 805667-B21, 819799-001, and N0H86AA in compatible server and workstation systems.
Standard DDR4 voltage of 1.20V keeps power draw low during typical server workloads. Unbuffered design eliminates register overhead, reducing heat generation compared to registered alternatives. The single-rank 1Rx8 organisation contributes to efficient thermal performance under sustained memory operations in multi-module configurations.
This module upgrades systems currently running lower-capacity DDR4 ECC UDIMM memory or replaces failed modules in HP server platforms. The 4GB capacity suits basic virtualisation hosts, file servers, and entry-level workstations. Buyers needing higher density per slot or registered DIMM support for larger memory arrays should verify platform requirements before purchasing.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Align the notch on the module with the slot key, press firmly until both side clips click shut, then confirm the system detects the full 4 GB at 2133 MHz in BIOS.
No scheduled maintenance is required; if errors appear, run a memory test and replace the module if it fails.
The 2133 MHz speed and CL15 latency set the throughput ceiling before voltage or thermal limits are reached.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?