Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR4 2133MHz ECC registered server DIMM with 1Rx8 organisation and 1.2V operation
This 4GB DDR4 2133MHz ECC RDIMM module is a compatible replacement for Micron MTA9ASF51272PZ-2G1A2II and MTA9ASF51272PZ-2G1B1 parts. It targets server and workstation systems requiring registered memory with error correction. The single-rank 1Rx8 configuration operates at 1.2V standard DDR4 voltage with CL15 latency. Buyers needing higher capacity per slot or non-ECC unbuffered memory for consumer platforms should look elsewhere.
Registered DDR4 modules at 2133MHz draw modest power at 1.2V during typical server workloads. The ECC circuitry adds minimal overhead while providing data integrity for mission-critical applications. Passive cooling via chassis airflow is sufficient as these modules generate low heat under normal registered DIMM operation. No active cooling or special thermal management is required for standard deployment.
The 288-pin DDR4 DIMM form factor fits standard DDR4 RDIMM slots in compatible server and workstation motherboards. Verify your system supports DDR4 2133MHz registered ECC memory before installation. The 1Rx8 organization allows flexible population across available memory channels. Systems requiring load-reduced DIMMs or different voltage specifications cannot use this module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Micron |
| Model name | MTA9ASF51272PZ-2G1A2II, MTA9ASF51272PZ-2G1B1 |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Micron Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Power down the server, open the chassis, align the notch on the 288-pin DDR4 RDIMM with the slot key, press firmly until both retention clips click, then verify the module is seated evenly; the step often missed is ensuring both clips lock fully, as a partially seated stick will not post.
The module itself requires no scheduled maintenance; if a correctable ECC error count rises or the server logs uncorrectable errors, replace the stick — otherwise it runs for the life of the platform.
The 4GB capacity is the first bottleneck; once the working set exceeds 4GB the system swaps to storage, so latency spikes before the 2133MHz speed or 1.20V thermal envelope become limiting factors.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?