Crucial CT32G56C46S5 32GB DDR5 5600 CL46 262-pin SO-DIMM laptop RAM
- 32 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR4 2666MHz CL19 260-pin SODIMM laptop memory compatible with HP part numbers 937356-800, L10598-850 and L33259-001
This 4GB DDR4 2666MHz CL19 module is built as a direct replacement for HP part numbers 937356-800, L10598-850 and L33259-001. It targets owners of compatible HP laptops, notebooks and all-in-one systems who need to restore or expand memory capacity with a verified match.
The stick uses a standard 260-pin SO-DIMM edge connector and runs at the DDR4 default voltage of 1.20V. It is unbuffered and non-ECC, so it drops into ordinary consumer laptop slots without requiring server-grade chipset support. No heat spreader is fitted, keeping the profile low for tight chassis clearances.
Replacing a 2GB module or a slower DDR4 SO-DIMM with this 4GB PC4-21300 unit adds headroom for everyday multitasking and reduces swap-file activity. The upgrade is worthwhile when the system board accepts 2666MHz CL19 memory and the user wants a tested, lifetime-warranted module rather than an unverified alternative.
Measured against everything we stock in Laptop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for HP |
| Model name | 937356-800, L10598-850, L33259-001 |
| Total capacity | 4 GB |
| Product type | 260-Pin DDR4 SO-DIMM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Memory | |
| CAS latency | CL19 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Recommended for | Compatible Replacement for HP 937356-800, L10598-850, L33259-001 |
The module is rated for 2666 MT/s. The memory controller in the laptop will set the final speed, which can be lower if the system only supports a slower DDR4 rate.
It uses the standard 260-pin DDR4 SO-DIMM form factor. The stick is physically compatible with any laptop slot that accepts DDR4 SO-DIMMs, including the HP part numbers 937356-800, L10598-850 and L33259-001.
Align the notch with the key in the slot, insert at a slight angle, then press down firmly until both side clips click into the notches. The step often missed is pressing hard enough to engage both clips fully.
More in Laptop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?