Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB DDR4 2400 ECC registered DIMM with CL17 latency and 1.2 V operation for server workloads
This 64 GB registered DIMM brings error-correcting DDR4 memory to servers and workstations that require data integrity under sustained loads. The module runs at 2400 MHz with CL17 latency and standard 1.2 V operation. It targets administrators upgrading compatible platforms that support registered ECC memory.
The 2S2Rx4 (4Rx4) organization uses major-brand components mounted on a 288-pin PCB. Registered buffering reduces electrical load on the memory controller, allowing higher densities per channel. ECC circuitry detects and corrects single-bit errors during normal operation.
The PC4-19200 interface caps peak throughput at the rated transfer rate. Systems limited to lower memory clocks will downshift the module accordingly. Quad-rank density may restrict the number of modules per channel on some platforms. Verify maximum supported capacity and rank limits before installation.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 64 GB |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2S2Rx4 (4Rx4) |
| Power | |
| Rated voltage | 1.2 V |
The module operates at DDR4 2400, rated PC4-19200, delivering the standard peak transfer rate for that speed grade.
It fits a standard DDR4 288-pin DIMM slot; the registered design adds a register chip, so verify your motherboard supports RDIMMs and that heatsink clearance is adequate.
Align the notch with the key in the 288-pin slot, press firmly until both retention clips click, then confirm the system detects the full 64 GB and ECC functionality in BIOS.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?