Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB DDR4 3200 ECC RDIMM module with 2Rx4 registered design and CL22 latency for server workloads
This 64GB DDR4 3200MHz module is built for servers and workstations that require error-correcting registered memory. It delivers 64GB capacity in a single 288-pin DIMM running at 1.20V with CL22 latency. The 2Rx4 organisation suits high-density configurations where data integrity is critical.
Registered buffering reduces electrical load on the memory controller, allowing larger memory arrays in multi-socket platforms. Major brand DRAM chips are used throughout and every module undergoes quality assurance testing for dependable operation. The standard DDR4 1.2V voltage ensures compatibility with existing DDR4 server power delivery.
Confirm that your motherboard accepts DDR4 registered ECC DIMMs and supports 3200MHz speeds at the required voltage. Systems limited to unbuffered UDIMMs or earlier DDR generations cannot use this module. Check the qualified vendor list or manual for maximum capacity per slot and total system limits.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 64 GB |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.2 V |
The module runs at 3200 MT/s with CL22 timing at 1.20 V, delivering PC4-25600 bandwidth when the platform supports that speed.
It requires a standard DDR4 288-pin DIMM slot; the registered design adds a buffer chip, so verify the motherboard supports RDIMM and has enough height clearance.
Power off the system, align the notch with the slot key, press firmly until both latches click, then enable ECC in the BIOS — skipping the BIOS step leaves error correction inactive.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?