Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 64GB DDR5 4800 ECC RDIMM module with CL40 latency and 1.1V operation for HP server upgrades
This 64GB DDR5 4800 module is a registered ECC DIMM built for server and workstation platforms that require error-correcting memory. It operates at 1.10V with a CAS latency of 40 and uses a 2Rx4 organisation. The part replaces HP part numbers N20162-001, P43333-1A1, P50312-B21 and P56153-001.
The module is a direct equivalent for the listed HP part numbers and upgrades systems currently running lower-capacity or slower DDR5 registered ECC memory. The jump is worthwhile when the platform supports DDR5 4800 speeds and needs the 64GB density per DIMM to reach higher total memory configurations.
Verify that your motherboard or server chassis accepts 288-pin DDR5 RDIMMs and that the memory controller supports 64GB single-rank-equivalent 2Rx4 modules at 4800 MT/s. Confirm the maximum supported memory per slot and the total population limit before ordering.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for HP |
| Model name | N20162-001, P43333-1A1, P50312-B21, P56153-001 |
| Total capacity | 64 GB |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 (EC8) |
| Power | |
| Rated voltage | 1.1 V |
This module uses the standard 288-pin DDR5 DIMM form factor. It requires a server or workstation motherboard with DDR5 RDIMM slots that support 1.10V operation and registered memory.
Power down the server and disconnect the power cord. Align the notch on the 288-pin module with the slot key, press firmly until both retention clips click shut. A common error is not fully seating the module so the clips do not engage.
Replace the module if memory diagnostics report uncorrectable ECC errors, if the system fails to POST with the module installed, or if a capacity upgrade is needed beyond the current 64GB configuration.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?