Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB DDR5 5600 ECC registered server module with 2Rx4 Micron chips, CL40 at 1.1 V
This A-Tech 64GB DDR5 5600 ECC RDIMM module is built for server and workstation platforms that require registered memory with error correction. It uses Micron DRAM chips and runs at the standard DDR5 voltage of 1.10V with a CAS latency of 40.
The module suits administrators expanding capacity in systems that support 2Rx4 registered DIMMs and need 5600 MT/s operation. It will not work in desktop boards that accept only unbuffered non-ECC memory or in laptops that use SODIMM slots.
The bare circuit board relies on chassis airflow for cooling, which is typical for dense server configurations where modules sit in directed air paths. No additional software, cables or mounting hardware are bundled with the single stick.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Micron MTC40F2046S1RC56BD2 MTC40F2046S1RC56BG1 |
| Model name | A-Tech 64 GB DDR5-5600 ECC RDIMM Server RAM Module |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | Micron Chipset |
| Memory | |
| CAS latency | 40 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
Yes, the module is a 288-pin DDR5 RDIMM and requires a server or workstation motherboard with DDR5 registered DIMM slots.
The module runs at 5600 MT/s; if mixed with slower DDR5 modules the system will typically operate all memory at the lowest common speed.
Check the BIOS memory information or use a tool such as dmidecode to verify speed shows 5600 MT/s and ECC status reports as enabled.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?