Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64GB DDR5 6400 ECC registered server DIMM with 2Rx4 layout and 1.1V operation
This 64GB DDR5 6400 ECC registered DIMM is built for servers and workstations that require error-correcting memory at standard voltage. It uses a 288-pin form factor with a 2Rx4 rank configuration and CAS latency of 32. The module operates at 1.10V and is validated as a direct replacement for specific Hynix part numbers.
It replaces the Hynix HMCG94AHBRA, 480N, 481N and 487N modules when a system calls for that exact DDR5 6400 registered ECC specification. The upgrade is worth it when the platform supports DDR5 6400 RDIMM population rules and the workload needs the higher bandwidth of PC5-51200. Systems limited to lower DDR5 speeds or unbuffered DIMMs will not accept this module.
The DDR5 6400 RDIMM standard requires a memory controller and BIOS that support 6400 MT/s registered ECC operation at 1.10V. Population limits depend on the specific CPU and motherboard qualification list; exceeding the supported ranks per channel will prevent boot. Mixing with different speeds, ranks or unbuffered DIMMs is not supported by the DDR5 RDIMM specification.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Hynix HMCG94AHBRA HMCG94AHBRA480N HMCG94AHBRA481N HMCG94AHBRA487N |
| Model name | A-Tech 64 GB DDR5-6400 ECC RDIMM Server RAM Module |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 6400 (PC5 51200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | 32 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
This module uses the standard 288-pin DDR5 RDIMM form factor, so it fits any server or workstation slot designed for DDR5 registered DIMMs.
Align the notch with the slot key, press firmly until both retention clips click, and verify the motherboard detects the full 64 GB capacity at 6400 MT/s in the BIOS.
No scheduled maintenance is required; the module has no heat spreader or moving parts, so it runs for the system's lifetime unless a hardware fault occurs.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?